RPR RPS Radiant Warmers Light-weight, versatile and compact

The radiant warmers are best used for heating and lighting of neonatal units, baby-care benches, cots, etc. Heating and illumination are provided by a quartz resistance and two Daylight bulbs respectively.
Two models of radiant warmers are available:
- the RPR lamp is provided with a thermostatic control of heating
- the RPS lamp is provided with an electronic servo-control of heating, by means of a temperature probe to be placed on baby’s skin.
Both of them consist in an overhead fitting 80 cm long (RPR 80 and RPS 80) or 150 cm long (RPR 150 and RPS 150).
The RPR and RPS Radiant Warmers can be wall-mounted, by means of a wall-mounting kit, in order to be placed above cots and benches. The RPR 80 and RPS 80 can be also mounted on a height adjustable mobile stand on a T-base, that facilitates manoeuvrability in the ward and positioning above cots.
The RPS Radiant Warmer is equipped with an electronic control panel that allows managing of heating and illumination. The following heating modes are available:
SERVO-CONTROLLED MODE : The heating level is controlled by the microprocessor in order to achieve and maintain the required baby’s skin temperature
MANUAL MODE : The heating level is set directly as a percentage of maximum heating power and an acoustic warning every 10 minutes is activated.
PRE-HEATING MODE: The heating level is automatically set at 30% of the maximum heating power.
Two digital displays show the baby’s actual skin temperature and the set temperature (in servo-controlled mode) or the heating percentage (in manual mode).
A full range of alarms allows maximum safety of operation: the device is provided with visual and acoustic alarms for high and low skin temperature, probe failure, probe disconnection and power failure.